Rigging And Lifting Safety Training

    All staff involved in the rigging and lifting activities must be made aware and trained about the safety training and operational procedure. Lifting Equiment must only be operated by trained staff.

The main reason of accident occurred in rigging industry is often caused by the lack of knowledge and not appropriately trained staff in the field. Hence, from time to time there should be training programs to remind the staff on the importance of safety in the working field, especially in the rigging and lifting industry. Training program such as Basic Safety Training from Health and Safety Infrastructure Association for Hoisting dan Rigging will provide basic knowledge to staff about rigging and lifting safety principles in the construction industry.

Safety rigging operations need riggers who understand few things below :

1. Weight and Rigging Hardware
2. Lifting Equipment Capacity
3. Working Load Limit of Lifting Wire Rope, Sling and Hardware

    When the capacity and weight are measured and known, Rigger has to find way to do the weightlifting in an appropriate way. Trained and experienced rigger is aware of the dangerous of this activity. In addition, rigger must know the factors impacting on the lifting safety, reduced on capacity and the safety of rigging, weightlifting and landing. Rigger must be used to do the correct and proper inspection and the used of sling and other hardware. Towing and rigging accidents can mostly be prevented by staff onsite by following the basic safety practice of lifting and not cheating. When the crane operator is working along with the rigger or rigging crew, it is important that the operator to know all the lifting aspects and an agreed means of communication that will be used, including signal used.

Socketing

    Socketing steel wire rope takes a long time. PT. Mitra Pradana Jaya has a trained team and provide socketing services onsite with a step-by-step process according to the applicable standards. This includes expanding the wire rope, cleaning the wire and using the wirelock. Wirelock is a recommended resin brand for socketing which meets ISO 17558, DNV-OS-E304 standards and has received approval from DNV, Lloyds and ABS. For more than 50 years, Wirelock has been the premium socketing product for industries such as architecture, mining, offshore general engineering and so on.

Onsite Inspection

    PT. Mitra Pradana Jaya provides inspection services periodically or according to clients’ request. Inspection of heavy lifting equipment is intended to ensure that the equipment is ready for use and the reliability of the equipment is maintained.